Collapse temperature comes up often in conversation and rarely with the context attached. Here we lay out the basics in order, then work through the practical considerations.
Last reviewed on 2026-03-09. Where a claim depends on a specific study, the study is described rather than over-claimed.
The process usually has three stages: freezing, primary drying, and secondary drying. Freezing sets the ice crystal structure and can determine pore size in the final cake. Primary drying removes free ice by sublimation at low pressure and low shelf temperature. Secondary drying removes bound water by raising the shelf temperature, although some water may remain as part of the solid. Cycle parameters depend on formulation, fill volume, vial type, and equipment performance.
The physical chemistry of freezing influences whether a formulation forms an amorphous glass or a crystalline solid. Amorphous systems can collapse if product temperature rises above the glass transition temperature of the freeze concentrate. Crystalline systems may show eutectic melting, where ice and solute melt together at a fixed temperature. Formulators add bulking agents, lyoprotectants, and buffers to preserve structure and biological activity. The optimum cycle keeps product temperature below critical thresholds during primary drying while allowing efficient sublimation.
Lyophilization is a dehydration process that removes water from a frozen material by sublimation under low pressure. The material is first frozen so that water becomes ice; then the surrounding pressure is lowered below the vapor pressure of ice. Heat is applied gently so ice changes directly to vapor without passing through a bulk liquid phase. The vapor is collected on a cold condenser, leaving a dry porous matrix. This process differs from simple evaporation because the material remains frozen during the main drying stage.
Reconstitution involves adding a suitable diluent, often sterile water or a buffer, to the dried cake. Gentle swirling or inversion helps dissolve the material without creating excessive foam. The time required for complete dissolution can range from seconds to several minutes and depends on the cake structure and the diluent. Improper reconstitution, such as vigorous shaking or using the wrong diluent, can cause protein aggregation or loss of activity. After reconstitution, the product may have a limited shelf life and should be used according to its labeling.
Lyophilized products are typically hygroscopic and require protection from moisture during storage. Manufacturers seal them in glass vials, often under vacuum or an inert gas such as nitrogen. The container closure system, including the stopper and crimp seal, must prevent water vapor ingress. Storage temperature varies from controlled room temperature to refrigerated or frozen conditions, depending on the formulation. Humidity-controlled environments are essential because even brief exposure to ambient air can degrade the product.
Stability of a lyophilized product depends on its glass transition temperature, the temperature at which the amorphous cake transitions from a glassy to a rubbery state. Storage below this temperature minimizes molecular mobility and slows chemical degradation. If the storage temperature exceeds the glass transition temperature, the cake may collapse, shrink, or become sticky. Accelerated stability studies at elevated temperatures and humidity help predict shelf life, but they do not always reflect real-time behavior. Residual moisture content also plays a critical role in long-term stability.
| Property | Value | Notes |
|---|---|---|
| Common synonyms | Freeze-drying, lyophilisation | Lyophilisation is the British spelling; the process is not simple evaporation. |
| Primary drying pressure | 0.05–0.3 mbar | Pressure must remain below the vapor pressure of ice at the product temperature. |
| Sublimation temperature | Below 0 °C | Ice changes directly to vapor while the product remains frozen. |
| Typical shelf temperature | −40 to −10 °C | Exact setting depends on formulation critical temperature and equipment. |
| Cycle duration | 12–72 hours | Time varies with fill volume, formulation, and dryer performance. |
The process generally proceeds in three stages: freezing, primary drying, and secondary drying. During freezing, controlled cooling converts water into ice and may also crystallize or vitrify solutes. In primary drying, the pressure is lowered below the triple point, and heat is supplied so ice sublimes directly to vapor. Secondary drying removes water that remains bound to the solid matrix, yielding a low final water content. Product temperature must stay below the collapse or glass transition temperature to maintain structure. Cycle design therefore balances shelf temperature, chamber pressure, and time.
Freeze-drying is used for materials whose activity or structure depends on low temperature and low water content. Examples include certain biologics, diagnostic reagents, starter cultures, coffee, and porous inorganic precursors. The dried product forms a cake whose porosity aids rapid wetting and dissolution. Main drawbacks are high energy use, long cycle times, and sensitivity to formulation and equipment variation. Questions remain about how freezing rates and ice morphology affect batch uniformity, especially when moving from laboratory to production scale.
Misconceptions about lyophilization include the idea that dried products are indefinitely stable or that vacuum sealing eliminates all degradation. Chemical reactions can continue in the solid state, and some proteins lose activity even at low moisture. Another misconception is that any freeze-dryer cycle can be scaled by time alone; heat and mass transfer differ with equipment and load. Open questions remain about predicting long-term stability from short accelerated studies, particularly for amorphous formulations. Real-time stability data remain the standard for shelf-life assignment.
After lyophilization, the dried product is often sealed under vacuum or an inert gas to limit moisture and oxygen exposure. Vials, stoppers, and seals must maintain their barrier throughout shelf life. Storage temperature depends on product sensitivity: some cakes tolerate controlled room temperature, while labile biologics require refrigeration. Humidity is a critical variable because dried cakes are hygroscopic and can absorb water when exposed to air. Handling procedures therefore limit open-vial time and use desiccated environments for sampling.
A formulation often contains excipients that protect the active ingredient during freezing and drying. Bulking agents provide structure, while lyoprotectants stabilize sensitive molecules. The freezing step can produce ice crystals whose size and distribution affect the drying rate, and cycle design includes freezing, annealing, and drying phases. If the product temperature rises above a critical value, the cake may collapse or lose its porous structure. Successful lyophilization therefore depends on the interaction between formulation, equipment, and cycle design.
Lyophilization is a dehydration process that removes water from a frozen material by sublimation under low pressure. The material is first frozen to convert liquid water into ice. Next, the pressure is reduced below the triple point of water so that ice changes directly into vapor without passing through a liquid phase. This step is called primary drying. The result is a porous solid or cake that retains the original shape of the frozen solution.
In 2019, trastuzumab emtansine was approved in the United States for the adjuvant treatment of patients with HER2-positive early breast cancer (EBC) who have residual invasive disease after neoadjuvant taxane and trastuzumab-based treatment. Approval was based on KATHERINE (NCT01772472), a randomized, multicenter, open-label trial of 1486 patients with HER2-positive EBC. Breast tumor samples were required to demonstrate HER2 overexpression defined as 3+ IHC or ISH amplification ratio ≥ 2.0 determined at a central laboratory using Ventana's PATHWAY anti-HER2-/neu (4B5) Rabbit Monoclonal Primary Antibody or INFORM HER2 Dual ISH DNA Probe Cocktail assays. Patients were required to have had neoadjuvant taxane and trastuzumab-based therapy with residual invasive tumor in the breast and/or axillary lymph nodes. Patients received radiotherapy and/or hormonal therapy concurrent with study treatment per local guidelines. Patients were randomized (1:1) to receive trastuzumab emtansine 3.6 mg/kg intravenously or trastuzumab 6 mg/kg intravenously on day 1 of a 21-day cycle for 14 cycles. The trial's primary endpoint was invasive disease-free survival (IDFS), defined as the time from the date of randomization to first occurrence of ipsilateral invasive breast tumor recurrence, ipsilateral local or regional invasive breast cancer recurrence, distant recurrence, contralateral invasive breast cancer, or death from any cause.
=== Pandemics, disinfectants and healthcare systems === Increased antibiotic use during the early waves of the COVID-19 pandemic may exacerbate this global health challenge. Moreover, pandemic burdens on some healthcare systems may contribute to antibiotic-resistant infections. The use of disinfectants such as alcohol-based hand sanitizers, and antiseptic hand wash may also have the potential to increase antimicrobial resistance. Overuse of disinfectants can lead to mutations that induce antimicrobial resistance. On the other hand, "increased hand hygiene, decreased international travel, and decreased elective hospital procedures may have reduced AMR pathogen selection and spread in the short term" during the COVID-19 pandemic. Critically ill patients are prone to infections, and because of that, they often require antimicrobials. The more antimicrobials, the more resistance one becomes to it. Antimicrobial resistance (AMR) significantly strains healthcare systems and national economies. The World Bank estimates that by 2050, AMR could increase healthcare costs by around US$1 trillion and cause global economic losses of US$1–3.4 trillion annually by 2030. Resistant infections are harder to treat, often requiring longer hospital stays, additional tests, and stronger, more expensive medications, placing extra pressure on hospitals and health systems, especially during pandemics. A 2024 United Nations High-Level Meeting on AMR has pledged to reduce deaths associated with bacterial AMR by 10% over the next six years.
=== In production === Pneumatic tube systems are used in production plants. Uses include conveying spare parts, measuring instruments, tools, or work pieces alongside conveyor belts or in the production process. In industrial laboratories samples are transported through the pneumatic tube systems. These can be conveyed in any physical state (solid, liquid, gas) and at any temperature. For example, the industrial company ThyssenKrupp sends 900 °C (1,650 °F) steel samples through pneumatic tubes at a rate of 22 m (72 ft) per second from the furnace to the laboratory.
== Prognosis == Prognosis varies with the type of amyloidosis and the affected organ system. Prognosis for untreated AL cardiac amyloidosis is poor, with a median survival of six months. More specifically, AL amyloidosis can be classified as stage I, II or III based on cardiac biomarkers like Nt-proBNP and cardiac troponin. Survival diminishes with increasing stage, but recent advancements in treatments have improved median survival rates for stages I, II, and III, to 91.2, 60, and 7 months respectively. Outcomes in a person with AA amyloidosis depend on the underlying disease, organ(s) affected, and correlate with the concentration of serum amyloid A protein. People with ATTR, mutant ATTR and wild-type ATTR have a better prognosis when compared to people with AL and may survive for over a decade. Survival time is not associated with gender or age, however, some measures of reduced heart function are associated with a shorter survival time. Senile systemic amyloidosis was determined to be the primary cause of death for 70% of people over 110 who have been autopsied.
=== Anatomical features === The vitreous has many anatomical landmarks, including the hyaloid membrane, Berger's space, space of Erggelet, Wieger's ligament, Cloquet's canal and the space of Martegiani. Surface features:
Sources: en.wikipedia.org
== Professional activities == Tippett's work in cybersecurity has led to roles as speaker, contributor and advisor to government and private sector organizations. From 2003 to 2005, he served on the President's Information Technology Committee (PITAC), established by Congress in 1997 under the High Performance Computing Act of 1991 to "guide the Administration's efforts to accelerate the development and adoption of information technologies vital for American prosperity in the 21st century." The U.S. Chamber of Commerce awarded Tippett its first Leadership in Health Care Award at the Chamber's first annual Health Care Summit (2012) for his leadership of Verizon's incubator. Tippett was also Chief Scientist for ICSA Labs and previously served as president of the International Computer Security Association. Tippett is currently an adjunct professor in the Division of General Medical Sciences at Case Western Reserve University School of Medicine. In November 2017, T.E.N., a technology and information security executive networking and relationship-marketing firm, announced that Tippett received the 2017 ISE® Luminary Leadership Award.
He merged as many as fourteen neighboring municipalities and suburbs to the city on the Strait.although four, by government decree of 26 January 1933, broke away to form Villa San Giovanni (Campo Calabro and Fiumara again became autonomous after the war). The urban population thus exceeded 100,000. The reasons for this restructuring included a desire to speed up earthquake reconstruction, to make trade and communication by sea easier, and to entice emigration from small mountain towns into an urban center. During the 1920s and 1930s Reggio Calabria modernized, building new neighborhoods. Social housing districts sprang up and public facilities such as the Reggio di Calabria Centrale railway station, the National Museum of Magna Graecia and the Francesco Cilea Municipal Theater were built. Other cities benefited from the Fascist building policy. Minister of Public Works Luigi Razza built a new municipal palace for his hometown of Monteleone di Calabria (renamed Vibo Valentia). Vibo Valentia named its military airport, stadium, a square and a street in the historic center after Razza. As with the rest of Italy, Calabria's maximum support for fascism came with the Second Italo-Ethiopian War of 1935–1936, in which many Calabrians participated, momentarily relieving the region's prevailing misery with soldier's remittances. Many members of the Calabrian clergy supported the war. This marked the pinnacle of collaboration between Church and State following the Lateran Pacts of 1929.
Trump also indicated that what he called the UK's "stupidity" in transferring the Chagos Islands to Mauritius justified his demands on Greenland. Trump posted an image of a map showing Canada and Greenland as part of the US and an AI image of him along with JD Vance and Marco Rubio planting a US flag on Greenlandic soil. On 21 January, Trump had asked the chairman of the Joint Chiefs of Staff Dan Caine to present potential options and the impacts of using military force to seize Greenland, ultimately resulting in Trump deciding against an invasion, Trump administration officials told NBC News.
Unlike M1 macrophages, M2 macrophages secrete an anti-inflammatory response via the addition of Interleukin-4 or Interleukin-13. They also play a role in wound healing and are needed for revascularization and reepithelialization. M2 macrophages are divided into four major types based on their roles: M2a, M2b, M2c, and M2d. How M2 phenotypes are determined is still up for discussion but studies have shown that their environment allows them to adjust to whichever phenotype is most appropriate to efficiently heal the wound. M2 macrophages are needed for vascular stability. They produce vascular endothelial growth factor-A and TGF-β1. There is a phenotype shift from M1 to M2 macrophages in acute wounds, however this shift is impaired for chronic wounds. This dysregulation results in insufficient M2 macrophages and its corresponding growth factors that aid in wound repair. With a lack of these growth factors/anti-inflammatory cytokines and an overabundance of pro-inflammatory cytokines from M1 macrophages chronic wounds are unable to heal in a timely manner. Normally, after neutrophils eat debris/pathogens they perform apoptosis and are removed. At this point, inflammation is not needed and M1 undergoes a switch to M2 (anti-inflammatory). However, dysregulation occurs as the M1 macrophages are unable/do not phagocytose neutrophils that have undergone apoptosis leading to increased macrophage migration and inflammation. Both M1 and M2 macrophages play a role in promotion of atherosclerosis. M1 macrophages promote atherosclerosis by inflammation.
Sources: en.wikipedia.org
=== Infectious diseases === Among the human-specific infectious pathogens studied on humanized mice models, the human immunodeficiency virus has been successfully studied. Besides this, humanized models for studying Ebola virus, Hepatitis B, Hepatitis C, Kaposi's sarcoma-associated herpesvirus, Leishmania major, malaria, and tuberculosis have been reported by various studies. NOD/scid mice models for dengue virus and varicella-zoster virus, and a Rag2null𝛾cnull model for studying influenza virus have also been developed.
For example, the Hoagland and Arnon study did not adequately appreciate that hydroponics has other key benefits compared to soil culture including the fact that the roots of the plant have constant access to oxygen and that the plants have access to as much or as little water and nutrients as they need. This is important as one of the most common errors when cultivating plants is over- and underwatering; hydroponics prevents this from occurring as large amounts of water, which may drown root systems in soil, can be made available to the plant in hydroponics, and any water not used, is drained away, recirculated, or actively aerated, eliminating anoxic conditions in the root area. In soil, a grower needs to be very experienced to know exactly how much water to feed the plant. Too much and the plant will be unable to access oxygen because air in the soil pores is displaced, which can lead to root rot; too little and the plant will undergo water stress or lose the ability to absorb nutrients, which are typically moved into the roots while dissolved, leading to nutrient deficiency symptoms such as chlorosis or fertilizer burns. Eventually, Gericke's advanced ideas led to the implementation of hydroponics into commercial agriculture while Hoagland's views and helpful support by the university prompted Hoagland and his associates to develop several new formulas (recipes) for mineral nutrient solutions, universally known as Hoagland solution.
This was important for the introduction of new emergency acts: the grand coalition gave the ruling parties the two-thirds majority of votes required for their ratification. These controversial acts allowed basic constitutional rights such as freedom of movement to be limited in case of a state of emergency.
=== Industrial uses === The iron compounds produced on the largest scale in industry are iron(II) sulfate (FeSO4·7H2O) and iron(III) chloride (FeCl3). The former is one of the most readily available sources of iron(II), but is less stable to aerial oxidation than Mohr's salt ((NH4)2Fe(SO4)2·6H2O). Iron(II) compounds tend to be oxidized to iron(III) compounds in the air.
== Differential diagnosis == Other disorders that may be accompanied by chorea include benign hereditary chorea, bilateral striatal necrosis, abetalipoproteinemia, ataxia–telangiectasia, biotin-thiamine-responsive basal ganglia disease (BTBGD), Fahr disease, familial dyskinesia–facial myokymia (Bird–Raskind syndrome) due to an ADCY5 gene mutation, glutaric aciduria, Lesch–Nyhan syndrome, mitochondrial disorders, Huntington's disease, Wilson disease, hyperthyroidism, lupus erythematosus, pregnancy (chorea gravidarum), drug intoxication and side effects of certain anticonvulsants (e.g. phenytoin) or psychotropic agents. Although some of these can similarly present in an acute way, there will typically be other neurological signs (such as ataxia or cognitive impairment), or other disease manifestations, or positive family history, which will help distinguish between them.
Sources: en.wikipedia.org
The main change is sublimation, in which ice becomes water vapor without melting into liquid water. This occurs when the chamber pressure is held below the vapor pressure of ice while mild heat is supplied. The result is a dry, porous solid that retains much of its original shape.
Freezing determines ice crystal size, solute distribution, and the pore network left after drying. A slow or fast freezing rate can produce different cake structures and affect reconstitution. It also sets whether the formulation follows an amorphous or crystalline drying path.
It removes most free water during primary drying and part of the bound water during secondary drying. A small residual moisture content often remains and is specified for each product. Complete removal is generally neither practical nor desirable for stability.
Lyophilized products should be stored in airtight containers, protected from moisture and light, at the temperature specified by the manufacturer. Many require refrigeration at 2–8 °C, while some need frozen storage. Always check the product label for specific conditions.